GV-AS2120 IP Control Panel
Provides control:
- 4 doors with one-way control or
- 2 doors with two-way control via Wiegand interface or 4 doors with two-way control via Wiegand interface and RS485 or Ethernet
Supports connection up to:
- 4 card readers via Wiegand 26/64 bit interface;
- 8 GV or GV-fingerprint card readers via RS485 or Ethernet interfaces
Designed to control and manage doors, turnstiles, barriers and elevator buttons.
Provides an alarm signal;;
Power - DC 12V, 3A / PoE+ (IEEE 802.3at, 25.5W).
GV-AS4110 IP Control Panel
Provides control:
- 4 doors with one-way or two-way control via Wiegand, RS485 or Ethernet interface;
- supports connection of up to 8 GV or GV-fingerprint card readers via Wiegand 26/64bit or RS485 or Ethernet interfaces;
- has on board 16 digital inputs and 24 relay outputs;
- provides an alarm signal;
Designed to control and manage doors, turnstiles, barriers and elevator buttons.
Power - DC 12V, 3A / PoE+ (IEEE 802.3at, 25.5W).
GV-AS8110 IP Control Panel
Provides control:
- 8 doors with one-way control or 4 doors with two-way control via Wiegand interface;
- or 8 doors with two-way control via Wiegand interface and RS485 or Ethernet;
Supports connection up to:
- 8 card readers via Wiegand 26/64 bit interface;
- 16 GV or GV-fingerprint card readers via RS485 or Ethernet interfaces;
- has on board 16 digital inputs and 24 relay outputs;
-Provides an alarm signal;
Designed to control and manage doors, turnstiles, barriers and elevator buttons.
Power - DC 12V, 3A / PoE+ (IEEE 802.3at, 25.5W).
GV-AS4111 Kit / GV-AS8111 Kit - a kit consisting of the GV-AS4110 or GV-AS8110 controller, power supply and battery compartment in an cabinet.
GV-EV48 - elevator control panel.
Designed to control and manage up to 48 elevator buttons.
Allows access to a given floor through connected devices - card readers, PIN codes or fingerprints.
- GV-EV48 - 24 - for elevator up to 24 floors. has 24 relay outputs;
- GV-RV48 - 48 - for elevator up to 48 floors. has 48 relay outputs;
Supports connection of up to 2 GV-card readers or GV-fingerprint via RS-485 or Ethernet interfaces.
GV-AS1620 Single Door Controller
With support for 2 readers on 3 interfaces:
- Wiegand;
- RS-485;
- TCP/IP;
2 readers can be connected to each of the interfaces.
- communication interface: - RS-485 / OSDP;
- memory for 100,000 ID cards;
- has 4 digital inputs for connecting magnetic contacts, exit buttons, fire and alarm systems;
- has 4 output relay contacts for lock control and alarm;
- has 2 LEDs to indicate an access granted and denied;
- DC 12V, 3A / PoE+ (IEEE 802.3at).
- 125 kHz EM card readers ;
- 13.56 MHz Mifare card readers;
- or dual card readers 125 kHz EM + 13.56 MHz Mifare;
- PİN code readers;
- QR code readers;
- Fingerprint readers;
Availability of Wiegand interface facilitates integration with third-party access control systems.
GV-FR Panel is a face recognition panel with built-in NFC / QR readers, with an İPS touch screen.
- 8" LCD touch screen with HD resolution 800 x 1280;
GV-FR Panel allows / denies access based on multiple identity options:
- by face;
- ID cards;
- card + double face identification;
QR codes are read using the Visitor Management System (GV-VMWeb) application of the GV-ASManager software.
GV-FR2020 Face recognition controller
Used as a reader in conjunction with GV-AS controllers and GV-ASManager software.
GV-FR2020 with software provides identification by:
- face;
- Id cards;
- ID Card + Face;
- PIN code + Face
GV-CS1320 is a controller with a built-in 2MP camera and 13.56 MHz Mifare card reader.
The GV-CS1320 has a memory capacity of up to 100,000 users.
The camera provides real-time video monitoring and network sending to "GV-ASManager" software
GV-CS1320 has the ability to identify the Face at the same time as the identification by the Card in the Card + Face mode.
The user can send a notification to the visitor in 3 ways:
- SIP/VoIP call;
- GV-ASNotify PC software;
- GV-Access mobile application.
Face ID5 is a series of access control and time attendance controllers.
Has the ability to identify individuals
- on the face;
- through the veins;
- by fingerprint;
- by ID cards;
- by PIN code;
there is a temperature detection function (optional).
Face ID2 - access control and time attendance controller with two biometric identification technologies:
- by fingerprint;
- on the face;
in addition, the identification function by ID card and PIN code is available.
Face ID X is a biometric access control and time attendance controller.
Operates on a single-core 1.2GHz microprocessor with 1.0GB flash memory and 1.0GB SDRAM.
Has a dual camera.
can store 30,000 facial codes, 10,000 fingerprints, 10,000 ID cards
Face ID 4d is a biometric access control and time attendance controller.
Provides contactless, fast and accurate personal identification by face detection.
With the latest Face Biobridge VX 7.0 facial recognition algorithm and a high-resolution IR camera, it provides clear identification even in low light.
FingerTec R2 və R2C (master and slave)
The R2 series is used for access control and Time attendance.
Identification methods:
*master - fingerprints, ID cards, PIN code;
*slave - fingerprints, ID cards;
Communication interface - TCP/IP, RS485, USB.
FingerTec R3
Is used for access control and Time attendance.
It has a 2.4" touch screen and an intuitive interface.
Identification methods: - fingerprints, ID cards, PIN code.
Communication interface - TCP/IP, RS485, USB.
FingerTec Q2i is a biometric Time attendance controller.
Applicable to medium and large enterprises
Identification methods: - fingerprints, ID card, PIN code.
Communication interface - TCP/IP, RS485, USB.
FingerTec TA500 and FingerTec TA200 Plus are biometric attendance controllers.
Сan store up to 2000 fingerprints; and up to 80,000 logs.
FingerTec TCMS V3 gives you the reports you need and makes payroll easy.
The equipment of the Kadex series - used for access control and Time attendance systems.
There is a master and slave readers.
Support identification by ID cards and PIN code.
Ingressus - Centralized access control and management system.
Controllers are available for one door (Ingressus I), for 2 doors (Ingressus II) and for 4 doors (Ingressus IV).
Users are identified by fingerprint, ID card or PIN code readers connected to controllers via Wiegand or RS485 interface.
