MAG2, MAG4 and MAG8 are conventional fire alarm panels certified to EN 54-2/4.
- MAG2 supports 2 zones with detectors and manual call points;
- MAG4 - supports 4 zones,
- MAG8 8 - supports 8 zones.
MAG2, MAG4 and MAG8 panels are housed in a compact housing.
They have a system of self-diagnosis of malfunctions.
The easy installation and easy configuration of MAG fire alarm panels make them the most applicable in homes, small and medium-sized offices.
MAG8 Plus conventional fire alarm panels certified to EN 54-2/4.
The panel supports from 8 to 16 zones with detectors and manual call points.
MAG8 Plus has a modular principle - a power supply, a control panel, a zone / siren expander, an indication module and a battery compartment.
The status of the system and zones is indicated on the LCD display and LED indicators.
MAG8 Plus is more suitable for large offices, schools, supermarkets and other large facilities.
SensoMAG detectors. certified EN 54 - 5/7;
-SensoMAG F10A / F10B - fixed temperature detectors 60*C / 75*C;
- SensoMAG R20 - rate-of-rise detector;
- SensoMAG S30 - optical smoke detector;
- SensoMAG M40 - combined (rite-of-rise + smoke) detector;
- SensoMAG XXX RL - detectors with relay output;
- B24, B24-HP, B24D, B24RD, B12L/U - Bases for conventional detectors;
- SensoMAG MCP50, MCP50 İP67 - manual call points certified EN54-11.
Various sirens for conventional system - siren / siren and strobe; street and indoor
• Piezo detector, LED strobe;
• volume level: 95-101dB;
• low profile design;
• Two-wire connection;
• Color - red, transparent.
Targeted solution for installation at lower level facilities. SIMPO is the perfect solution for profitable installations.
- Supports up to 2 loops, up to 250 detectors on each, covering 48 zones.
Up to 250 Teletek Electronics (SIMPO TTE Loop) devices can be connected per loop.
The status of the system and zones is displayed on the LCD and LED indicators.
Up to 64 panels (IRIS, iRIS8, SIMPO, Repeater) can be connected to a common network via the RS485 interface.
Panel monitoring is provided by the Observer software.
ProsTE software allows programming from a PC.
IRIS PRO fire alarm panel supporting 1 to 4 loops with a maximum of 96 zones.
- Each loop supports up to 250 detectors and modules.
- The system status is shown on the graphical display, zone and problem information is displayed on the LED indicators.
- With the help of a special algorithm "Two-stage alarm level", an effective reduction in the number of false alarms is achieved.
- The panel supports Day/Night mode.
- The panel supports two communication protocols, depending on the detectors used: Teletek Electronics (IRIS TTE loop) or System Sensor (IRIS SS loop).
- Up to 64 panels (IRIS, iRIS8, SIMPO, Repeater) can be connected to a common network via the RS485 interface.
- panel monitoring is provided by the Observer software.
- ProsTE software allows programming from a PC.
iRIS8S (with İRİS8 EXT loop extension) - addressable fire alarm panel that supports from 1 to 8 loops with 250 devices each and 500 zones covered
- works according to the Teletek Electronics communication protocol;
The total number of 8 loops in the system is achieved by connecting the iRIS8 Ext expansion unit with the ability to connect an additional 4 loops. The expansion unit has its own power supply and a panel with powerful siren outputs.
iRIS8B is the latest generation of addressable fire alarm panel.
The possibility to integrate eight loop expanders into a single system makes the panel suitable for use in small to large buildings and installations.
The system status is displayed on the TFT display, and information about zones and errors on the LED indicators.
Up to 64 panels (IRIS, iRIS8, SIMPO, Repeater) can be connected to a common network via RS485 or Ethernet interface.
Panel monitoring is provided by the Observer software.
ProsTE software allows programming from a PC.
Repiter TFT IRIS/SIMPO
The repeater (repeater) is designed to display information about events from IRIS and SIMPO panels connected to a common network.
Communication between the Repeaters and IRIS, SIMPO panels is carried out through network modules.
IRIS printer - System message printer
IRIS PS72 - Redundant power supply
IRIS/SIMPO Redundant module - RS485 communication module
PASO Interface module - voice alarm system module
To ensure a modular structure, the blocks are placed in special cases. The enclosures are easy to mount and allow you to hide all power and communication cables.
The use of a number of modules with SIMPO, IRIS PRO or iRIS8 addressable panels allows you to expand the functionality of the fire alarm system.
SensoIRIS T110/T110 IS - fixed temperature and rate-of-rise detector;
SensoIRIS S130/S130 IS - optical smoke detector;
SensoIRIS M140/M140 IS - combined (heat + smoke) detector;
SensoIRIS B124, SensoIRIS B124-HP - bases for addressable detectors , various profiles;
DeepBase W - base for installation on a rough surface, pipelines, etc.
SensoIRIS ADDRESSABLE CALL POINTS - Manual call points;
SensoIRIS MCP150 - internal manual call point;
SensoIRIS MCP150 İP67 - outdoor manual call point IP67 standard;
SensoIRIS MCP150MR - manual call point Metal, powder-coated/red;
SensoIRIS MCP150PR - manual call point Plastic, ABS/red;
SensoIRIS MCP150PB - manual call point Plastic, ABS/blue.
- SensoIRIS WSOU/WSOU IS - wall Mount sounder;
- SensoIRIS WSST/WSST IS EN54-23 - VAD wall Mount sounder with strobes;
- SensoIRIS BSOU/BSOU IS - Base with built-in sounder in its body. Can be installed on the ceiling and on the wall;
- SensoIRIS WSB IP65 - Waterproof protected IP65 deep base. complies with EN 60529.
